DDM6 Mobile Fuel Polisher
The DDM6 Mobile Fuel Polisher is a powerful high flow fuel filtration and polishing module utilizing a two-stage filtration principle, which ensures that solid contamination, microbial activity and water ingress can all be effectively removed in a single pass.
- Flow rates up to 500 l/min.
- Filtasorb2 water removal media able to remove 100% free water and 99% entrained water from diesel fuel.
- System rated at 10 bar working pressure with safety shut-off at 3.5 bar.
- Optional secondary outlets allow the filters to be bypassed.
- Leakage or Spillage alert with float switch located in drip tray.
DDM6 Mobile Fuel Polisher Features & Benefits
Faster solution, greater savings
Stored fuel can develop solid particulate, water and diesel bug contamination if left for greater than 12 months without being replaced or cleaned. The DDM6 Mobile Fuel Polisher delivers a powerful throughput of up to 500 l/min. The DDM6 removes both solid particulate and water in a single pass ensuring fuel is clean and dry, is within specification and ready for use when required.
Challenging applications demand the highest performance
For equipment working in dirty locations in large operations across the globe it is critical that your filtration system can perform in the most challenging environments. The DDM6 delivers with each housing being hydrostatically pressure tested to the European Pressure Equipment Directive, 97/23/EC.
|Flow rate (l/m)||500|
|Indicative tank size (l)||500,000|
|Filtration Efficiency (max.)||99.9%|
|Particulate Removal (min.) (µm)||1|
|No. filter housings||6|
|Filter size & type||Size 2|
|Pump Type||Self Priming Centrifugal or as specified|
|Maximum System Pressure||10 bar|
|Remote Emergency Stop||Yes|
|Differential Pressure Indicator||Mechanical x6|
|Bund Float Switch||Yes|
|Noise Level (dBA @ 1m)||< 85|
|Operating Temperature (°C)||0 to 50°C|
|Dimensions (mm)||1750 (h) x 2270 (w) x 1340 (d)|
|Dry Weight (kg)||614|